Product Parameters
SK Centrifugal Pump
SK type high-efficiency non-clogging non-leakage pulp pump is a new generation of pulp pump products. It has obvious advantages such as high efficiency, good anti-clogging performance, no leakage during operation, and convenient installation and maintenance. It is widely used in the transportation of pulp media in paper and pulp enterprises.
Structural features:
1. The pump has a rear-opening structure, so there is no need to disassemble the pipeline during maintenance.
2. The inlet and outlet flanges of the pump are designed according to 1.6MPa pressure.
3. The impeller adopts three-blade or six-blade open impeller, which has high efficiency and does not require axial thrust compensation, is easy to maintain, and has low blockage rate.
4. The pump shaft is supported by a combination of imported cylindrical roller bearings and radial thrust ball bearings (angular contact ball bearings). Cylindrical roller bearings are installed at the pump end, and radial thrust ball bearings are installed face-to-face at the rotating end.
5. Shaft seals mainly include pumping ring plus single end mechanical seal, packing seal, single end mechanical seal, tandem mechanical seal, double end mechanical seal, combined seal of pumping ring and single end mechanical seal, and dynamic seal. .
6. The impeller adopts lost wax precision casting and performs dynamic balance verification
7. There are four kinds of materials: cast iron, cast steel, ordinary stainless steel and duplex stainless steel.
Low Pulse Pulp Pump
SJ type sizing pump, also known as low pulse pump. It is an ideal replacement product designed according to the actual situation of the paper industry in view of the large flow and low-head mixed-flow pumps widely used in general papermaking mills. The pulp is unstable and inconvenient to disassemble and assemble.
The pump has the advantages of high efficiency, stable pulp, long service life and convenient maintenance. The bearing is balanced in force at both ends of the pump body, and the pump casing is opened in the middle and can be repaired after opening the cover.
It is suitable for the matching of medium and high-speed paper machine pulp supply system, the use temperature is below 80 ºC, and the concentration is below 1% for pulp transportation.
Note: The pump looks from the coupling to the pump. The pump rotates counterclockwise. The inlet of the pump is on the right and the outlet is on the left. If you need to change the position of the inlet and outlet, it must be mentioned when ordering.
Vacuum Pulp Pump
Water ring vacuum pumps are suitable for pumping air and other non-corrosive, water-insoluble, and solid particles-free gases in order to obtain a higher vacuum in a closed container. It has the characteristics of high vacuum degree, high pumping speed in high vacuum area, compact structure, stable work and convenient maintenance.
Water ring vacuum pumps are suitable for working conditions where the suction pressure is lower than -0.08MPa. The working vacuum range is -0.03---0.08MPa.
1. Compared with SK series single-stage water ring vacuum pump, it has the characteristics of high vacuum degree and high pumping speed in high vacuum area. At the same pumping rate, the shaft power is higher than 2BV and 2BE series water ring vacuum pumps.
2. Compact structure and convenient maintenance.
3. It can extract gas containing water vapor, flammable, explosive, a small amount of dust, and a small amount of liquid
4. It can work in a harsh environment.
Water Ring Vacuum Pump
Water-ring vacuum pump is a highly effective energy-saving product developed on the basis of the years' scientific research results and production experience,by means of the energy-saving and consumption-reducing principle and combining the advanced know-how with the same products both at home and abroad.
This pump can be used either as a vacuum pump or an air compressor for the technological processes of vacuum filtering, vacuum water leading, vacuum feeding, vacuum vaporizing, vacuum concentrating, vacuum reversing, vacuum degassing, etc. And for pumping the gases which are not solved in water and contain no solid grains in the petroleum, chemical, mechanic, medicine,food,dyeing,environmental protection.electronic etc., industrial sections. Besides, because the air compression inside of it iTs .isothermal, so the pump can also be used to pump combustible and explosive gases.
Centrifugal Fan Pump
S and SH pumps are single-stage double-suction, horizontal split centrifugal pumps, which are used to transport clean water and liquids with physical and chemical properties similar to water.
The maximum temperature of the liquid should not exceed 80°C, which is suitable for water supply and drainage of paper mills, mines, cities, and power stations, farmland drainage and irrigation, and various water conservancy projects.
The bearings of this type of pump are at both ends of the pump body, and the force is balanced during operation, so it has a long service life. The pump body is a center-open type, which can be repaired after opening the cover, which is very convenient.
Note: The S-type pump looks from the coupling to the pump. The pump rotates clockwise. The water inlet of the pump is on the right and the water outlet is on the left. If you need to change the location of the import and export, it must be mentioned when ordering.
Note: The SH type pump looks from the coupling to the pump. The water pump rotates counterclockwise. The water inlet of the pump is on the left and the water outlet is on the right. If you need to change the location of the import and export, you must mention it when ordering.
Middle Consistency Slurry Pump
This non-clogging pump is a new and energy-saving pulp pump. After actual use, it has the characteristics of high efficiency, no or less leakage, good anti-clogging performance, stable operation, high reliability, and compact structure.
Mainly reflected in the following aspects:
1. It adopts semi-open or full-open impeller, the clearance between the wear plate and the front side of the impeller is adjustable, and the shaft seal mainly adopts mechanical seal and selects high-precision bearings (D-level accuracy) and high-quality shaft materials.
2. Can be widely used in light industry and papermaking industries where the temperature is lower than 110C and the concentration is lower than 6%. It can also be used in industrial and urban water supply, drainage and other occasions.
Submersible slurry pump
The submersible slurry pump is a single-stage, single-suction, centrifugal, and vertical slurry pump. It is our company's leading product. It is mainly suitable for the treatment of corrosive solid particles in electric power, metallurgy, coal, building materials, chemical industries and other industries.
A new generation of high-efficiency and energy-saving single-stage, single-suction, centrifugal slurry pump for slurry. They are mainly suitable for processing concentrates and tailings in ore dressing plants, removing and slag from thermal power plants, conveying coal slime and heavy-medium coal preparation in coal preparation plants, and conveying mortar in coastal river sand mining operations. The maximum weight concentration of the slurry that can be processed is: 45% mortar and 60% ore slurry.
It is a single-stage, single-suction, vertical centrifugal slurry pump. This series of pumps adopts the internationally advanced solid-liquid two-phase flow theory and is designed according to the principle of minimum loss. The geometry of the flow-passing parts conforms to the flow state of the medium, reducing local and along-the-way hydraulic losses such as vortex and impact, thereby reducing the wear of the flow-passing parts, improving hydraulic efficiency, and reducing operating noise and vibration; this series of pumps The flow parts are made of high-hard alloy cast iron, and its material has high abrasion resistance, corrosion resistance, and impact resistance, thereby increasing its life.
|
We can supply all types of pumps for paper mills. Please contact us to get the inquiry.
|
Company Profile
Jiangsu Leizhan International Group established in 2002.We are a China Based engineering company and machinery supplier committed to offer complate solution and provide high-cost-performance equipments related to stock preparation and paper-making industry.Our head office is located in Xuzhou, Jiangsu province. We have 15000 square meters Factory Building. For years,we have insisted on taking customer's value as our center and having strict quality-control and innovation in the whole process. With advantage technology and excellent equipment,we provide one-stop service from consultation,process design and optimization,manufacture,installation,commissing and personnel training and so on.At the same time,we can supply all kinds of stock preparation and paper making equipment and accessories.Besides,we can custom design according to customers' requirements.
Our products have reliable quality and superior performance and have been exported to Poland,Greece,Turkey,Iran,India,Packistan,Bangladesh,Thailand,Indonesia,Philippines,Malaysia,Vietnam,Mexico,Guatemala,Costa
Rica,Columbia,Egypt etc.We have established long-term cooperation relationship with many paper mills and agent.
Honesty,cooperation and win-win are important to us.We insisted on serve our customers with high quality products,sincere service and
good reputation.We are appreciated for the long-term trust and favor from our customers.Hope we can cooperate sincerely and make
progress together with our new and old customer.
Audited Supplier 
){kind=link}
){kind=link}