| Customization: | Available |
|---|---|
| After-sales Service: | Door to Door Service |
| Warranty: | 6 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The pulp beating disc refiner plate is the "heart" of the disc refiner and the cone refiner. In addition to the need for excellent wear resistance and impact toughness, the rationality of the tooth profile will directly affect the beating performance. "Three points for paper making, seven points for beating", to process different slurries, different indexes and the number of refiners in series should choose different tooth types. Therefore, the study of the relationship between the theory of specific blade edge load, the theory of specific surface load, rheological effect and beating performance, and the non-isolated understanding of the relationship between the various elements, is important to ensure the fiber bonding strength, filter performance, retention rate, quality of the finished paper and It is very important to save power consumption for beating.
Working Principle of Disc Working Principle:
"three-point paper making, seven-point beating", beating is to treat the fibers in the pulp by the mechanical action method of the grinding disc tooth pattern, so that it can be decomposed, appropriately cut and split; more importantly, the fibers absorb water during beating. Swelling makes it have higher elasticity and plasticity and meets the requirements of paper machine production, so that the produced paper can reach the expected quality index.
Grinding disc design has always followed the theory of specific blade edge load (SEL). The theory of specific blade edge load describes and characterizes the beating characteristics based on the effective load of the impact-shearing flocculated fiber per unit length at the intersection of the rotary blade tooth and the fixed blade tooth edge of the refiner. Specifically, it is determined by the effective power (net power) N of the refiner, the rotation speed n, and the cutting length L per revolution of the grinding plate.
Advantage of Refiner Plate:
1.Wide range of metallurgies developed for industry needs.
2.It can be designed according to various of versions and requirements.
3.Custom designed plates are developed in shortest time.
4.Stronger plates for longer life.
| Four series of multi-element alloy grinding disc plate | |
| HY Cut fin | It is suitable for partial free beating, and can quickly reduce the wet weight of long fibers under low power consumption, which is beneficial to improve the uniformity. |
| HY Soft fin | It is suitable for short fiber pulp, with weak cutting effect, maintaining fiber length and reducing wet weight loss. |
| HY Ease fin | It is suitable for multiple types of slurry, with strong dispersing and pumping capabilities, reducing power consumption and improving the output rate. |
| HY Broom fin | It is suitable for viscous beating and has a strong effect on fiber splitting and brooming, which is beneficial to the improvement of beating degree. |
| Inner diametral(mm) | 700 |
| Outer Diameter(mm) | 800 |
| Installation hole distance(mm) | 1000 |
| Diameters(mm) | 300-1700 |
| Thickness(mm) | 25-40 |
| Hole | 4-8 |
| Location size(mm) | 1228 |
| Model | 250-800 |
| Maximum line speed | 1480r/min(rmp) |
Our grinding discs plate are all qualified products subject to strict quality control and testing, please rest assured to use. In order to ensure that the grinding disc is at the minimum vibration value when running at high speed. In order to ensure that the grinding disc is in good condition during work, please install it strictly according to the installation instructions during installation:
1. When installing the combined grinding discs, the same gap should be maintained between the grinding discs, so as to avoid the grinding discs from squeezing and rupturing when they are heated and expanded.
2. When installing, the same group of fan-shaped grinding discs must be installed in strict accordance with the numerical order of the grinding discs, and the static and dynamic discs cannot be interchanged to ensure the effective balance of the grinding discs.
3. The two sets of grinding discs with the same rotation direction of the double disc grinding should be installed in pairs, left to left and right to right.
4. Different groups of fan-shaped grinding discs cannot be mixed and used because the thickness of the same group of grinding discs is processed together on a high-precision grinder, which requires high parallelism.
5. Before installing new grinding discs, clean the installation plate thoroughly, and do not completely fix it during installation. Wait for a group of grinding discs to be installed and adjust the gap between the grinding discs before they are completely fixed.
){kind=link}