| Customization: | Available |
|---|---|
| Certification: | ISO 9001:2000 |
| Surface Treatment: | New |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Density Cleaner mainly applied to remove all kinds of heavy impurities in paper pulp,like staples,stone,glasses,etc.Volute pulp inflow chamber,the eddy ability is strong and low pressure area subarea is obvious.This makes accepts and impurities separate thoroughly.Wear resistance ceramics cone,long service life.Specially designed long cone has small taper angle and fine cleaning efficiency.Equipment with PLC control cabinet,convenient and easy to control,sufficiently discharge impurities.
1. The equipment occupies a small area, is easy to operate, does not block the slag discharge port, and has high purification efficiency.
2. Double cone structure, strong separation ability for heavy slag.
3. Large-diameter feed tee, large throughput, low pressure, low power consumption, and simplified process design.
4. Can remove gravel, metal, glass and other heavy impurities, reduce subsequent equipment wear.
5. The tee is made of 304 stainless steel, the cone is thickened and wear-resistant ceramic, and the service life is long.
6. The main body is assembled in sections for easy maintenance.
7. Large throughput only, simplify process design
8. The equipment is divided into manual slag discharge and automatic slag discharge.
9. The automatic slag discharge uses a penetrating pneumatic valve, which is reliable in operation.
10. Control the interlock system to prevent fiber loss.
| Model | Capacity (t/d) | Consistency (%) | Inlet pressure (mpa) | Outlet pressure (mpa) |
Pressure of backwash water(mpa) | Capacity (m3/min) | Inlet diameter (mm) | Outlet diameter (mm) |
| ZSC31 | 10-20 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 0.8-0.9 | φ150 | φ80 |
| ZSC32 | 20-30 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 1.0-1.2 | φ175 | φ100 |
| ZSC33 | 30-45 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 1.3-1.5 | φ200 | φ125 |
| ZSC34 | 45-60 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 1.5-2.0 | φ225 | φ150 |
| ZSC35 | 69-75 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 2.0-2.5 | φ250 | φ150 |
| ZSC36 | 75-110 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 2.5-3.0 | φ250 | φ165 |
| ZSC38 | 100-140 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 3.0-3.5 | φ250 | φ180 |
| ZSC46 | 140-260 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 3.5-4.0 | φ250 | φ200 |
| ZSC56 | 200-400 | 0.8-6 | 0.15-0.35 | 0.1-0.3 | Inlet pressure+0.2 | 4.0-6.0 | φ300 | φ273 |
Low Density Cleaner
){kind=link}