| After-sales Service: | Door to Door Service |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO 9001:2008 |
| Surface Treatment: | Polishing |
| Manufacturing Process: | as to Order |
| Material: | Casting Steel or Stainless Steel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The fiber separator is mainly used to separate light and heavy impurities in the pulp, and to crush the pulp for a second time. The machine has a compact structure and high efficiency. It combines crushing, impurity removal and screening, which greatly simplifies the waste paper processing , Reduced energy consumption, is a must-have equipment for the production of high and medium-grade paper. It is mainly composed of two parts: one is the crushing part, and the other is the pressure sieve part, which has the advantages of compact structure, good effect of removing impurities, and multiple functions of one machine.
The fiber separator is new equipment developed for making fine stock from wastepaper. It helps separate heavy and light impurities in wastepaper stock and further defiber with higher efficiency but lower energy cost, thus different from traditional process which contrarily demands higher energy cost with lower production efficiency.
Feature:
1. Conical shell is favor of separating and removing light and heavy impurities and defibering at the same time.
2. Separating light and heavy impurities effectively,defibering sufficiently,efficient and energy-saving.
3. Can adopt automatic rejecting according to requirement,reliable operation.
Advantage:
The compact structure and high efficiency can greatly simplify the waste paper processing process and reduce energy consumption.
Application :
The machine especially works well on separating impurities (like paper fastener, sand, plastic film, plastic paraffin, wax asphalt) in waste paper to let stock clean and improves product grade.
Fiber sorter mainly consists of machine case, inlet and outlet pulp pipe, screen plate and impeller, etc.
The machine case usually is welded steel board in conical shape. At upper part along tangent direction arrange the pulp inlet and at the bottom a heavy impurity outlet. Before the machine case is a conical front cover connecting with machine case by hinge, easy to open when checking machine. In the middle of front cover install a light impurity outlet, behind the machine case is screen plate, stock passes screen holes and discharged from fine pulp outlet. The rotating impeller is close to screen plate, leaving a small clearance (1-3mm) between impeller and screen plate; impeller fixed on rotation shaft and the rotation shaft is supported by rolling bearing and driven by motor through belt.
| Model | LDF0 | LDF1 | LDF2 | LDF3 | LDF4 |
| Production capacity | 10-20t/d | 20-40t/d | 40-70t/d | 70-100t/d | 130t/d |
| Concentration of Feeding Pulp | ≤3% | ||||
| Pulp inlet pressure | 0.15-0.25MPa | ||||
| Scren Plate | Ф3/Ф4...Ф6/Ф7 jump 0.5 shoulder hole series | ||||
| Motor | Y180L-4/22kw | Y225M-4/45kw | Y250M-4/55kw | Y280S-4/75kw | Y315S-4/110kw |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}