Stainless Steel Winding Cylinder Mould

• Customization: Available
• Certification: ISO 9001:2008, CE
• Surface Treatment: Polishing
• Model NO.: LZCM101
• Material: Stainless Steel
• Guarantee: 1 Year
• Hardness: >HRC45
• Application: Paper Making Industry
• Name: Paper Machine Cylinder Mould
• Condition: New
• Raw Material: Stainless Steel
• Design Speed: Low Speed Machine
• Paper Kind: Toilet,Napkin,Fical Paper etc
• Details: Customization
• Size: Customization
• Brand: Customization
• Package: Standard
• Before Sale Service: 24 Hour Online to Support
• After Sales Service: Video Guidance, Field Guidance
• Freight Charge: According Actual
• Transport Package: Standard Sea Shipment Package
• Specification: According to customized
• Trademark: LEI ZHAN
• Origin: China
• HS Code: 84399900
• Production Capacity: 50000 Set/Year

Product Description

Paper Machine Cylinder Mould Introduce:

Cylinder is the main part in cylinder paper machine on which the paper width is formed.It is required to filter water evenly and not produce too much stirring in the trough when rotating.The cage should have sufficient stiffness and accurate geometry and should be installed horizontally.


The rotary shaft is fitted with a brass support bar device called spokes, with spokes spaced 100-150mm apart.The spokes support the central rim of the wheel, which is surrounded by grooves with horizontal bars of the same length as the net cage.The horizontal strip is about 1cm in diameter and 4cm from the center, parallel to the central axis.The bar is made of steel or brass and the section may be round or rectangular.There are protruding wheel rings on the outermost wheel rings, which are used to seal the corresponding parts of the net groove, so as to isolate the inside and outside of the cylinder.In the horizontal bar according to the spiral milling out of serrated groove, with a continuous diameter of about 3mm of metal wire spiral wound in the cylinder, then form a cage cylinder frame.The gap between adjacent wires is about 1cm.Finally, the copper wire is first covered with a thick brass or stainless steel inner mesh, and then covered with a thin surface mesh for paper making.In the net and face net are terminal net, is a special tool to tighten in the cylinder frame, with silver welding or welding butt up.The final assembly must concentric with the central shaft, and its stiffness should be sufficient to withstand the pressure of the volute roll without deformation.
 

The cylinder bearing device is outside the net groove.The two ends of the cylinder are connected with the side box of the net slot.Slurry after the Internet, through the copper mesh filter into the cylinder of white water, from both ends of the cylinder into the side box, and then out of the white water pump circulation.

Cylinder Mould
Structure		Material	Width	Diameter	Function
Common		Common	1000 ~ 8000	1000	1	Increase filtering area and speed, increase of production.
Piece-type	Winding type	Stainless Steel		1250	2	Improve finish paper quality including evenness, gram weight and aspect tension ratio.
	String chip type
Air exhaust		Copper		1500	3	Reduce wear and repair cost of SS wire and felt etc.
Vacuum				2000	4	Strengthen integrity and antiseptic property of the equipment to keep it durable.
				2500	5	High precision,beating the trail of less than 0.10 mm.
				3000	6	Accept customized size

 

Winding type	String Chip type
Slice being welded on every rod and slice in fall Winding type cylinder mould is widely being used as its high stability and long service life compared to string chip type.	Rod goes through the slice
Photo interpretation	Photo interpretation

Product Show




 

How to make an inquiry ?
Method 1	Provide us cylinder mould drawing.
Method 2	1. Working speed and working pressure
	2. Cylinder mould diameter and face length
	3. Cylinder mould material
	4. Cylinder mould structure
	5. Paper kind and weight (gsm)
Method 3	If you don't clear with above information,you are welcome to contact with us.We will help you to choose the most suitable cylinder mould.